Heli-Heli.com for Align, Gaui, Walkera, Esky
Login Contact Us About Us Policies My Account Log Out

Heli Parts
Airplane Accessories
FPV Accessories
FPV Racing
Nitro Supplies
Power Supplies
Electronic Speed Controllers (ESCs)
Tools / Supplies
Gift Certificates
> >

Hyperion Vengeance 5.8GHz Selectable 25mW / 250mW Video Transmitter [HP-FPVEN25250VTX]

Hyperion Vengeance 5.8GHz Selectable 25mW / 250mW Video Transmitter [HP-FPVEN25250VTX]
  • Currently 0/5 Stars.
No reviews | Write a Review









5.8GHz Video Transmitter

The Hyperion 5.8GHz Selectable 25mW / 200mW Video Transmitter 5.8Ghz transmitter packs 200mW of ultra clean 5.8GHz power in a micro sized video/audio transmitter! A must have for those looking to FPV Race. This VTX transmits a full range of 40 channels with RaceBand. Perfect for 250-size Quad racers! 


  • 40 channels: Cover A, B, C, D, and E bands
  • Micro sized and light weight
  • Transmitter frequency: 5645-5945MHz with 25mw/200mw power output
  • Transmitting distance > 25mw: 25-60m / 200mw: 100-300m (open area)

Included in the package

  • 1 x transmitting unit (TX)



  • Modulate: Wideband FM Modulate
  • Video Format: NTSC/PAL
  • Output Impedance: 50 Ohm
  • Output Power: 25mw 12-14dBm / 200mw 23-24dBm
  • Channel: 40 CH
  • Supply Current: 70/200mA
  • Video Band Width : 0~8.0 MHz
  • Audio Carrier Frequency: 6.5 MHz
  • Video Input Level: 0.8~1.2 Vp-p
  • Video Input Impedance: 75 Ohm
  • Audio Input Level: 0.5~2.0 Vp-p
  • Audio Input Impedance: 10K Ohm
  • Connector: RP-SMA Male Jack
  • Antenna connection: RP-SMA Female Jack
  • Dimension: 31mm x 22mm
  • Weight: 7.5g (without antenna)

Frequency List:

  CH 1CH 2CH 3CH 4CH 5CH 6CH 7CH 8
Group 1A57405760578058005820584058605880
Group 2B57055685566556455885590559255945
Group 3C58655845582558055785576557455725
Group 4D56585695573257695806584358805917
Group 5E57335752577157905809582858475866


Compatible with Fatshark, ImmersionRC, Boscam, Foxtech and other generic branded FPV receivers within the same frequency range. *Note: This VTX is 25mw / 200mw output power selectable. By default this VTX will transmit in 25mw. To transmit in 200mw output you must cut the output change wire. For more details review the manual in "Manuals and Support” section. *Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty. FPV Regulatory Notice The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license if you transmit in the 200mw output mode. Learn more about HAM licenses. It is your responsibility to ensure that the use of this product meets the requirements imposed by your governments rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. AirCraft-World.com cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

View Copter Cart
My Shopping Cart
Vias, MasterCard, Discover, American Express
Heli-Heli package tracking
Heli-Heli on Facebook
Check out our Youtube Page
Signup for the Heli-Heli Newsletter

Privacy Site Map Legal
Site best viewed using
IE 8 compatibility mode off