Heli-Heli.com for Align, Gaui, Walkera, Esky
Login Contact Us About Us Policies My Account Log Out

Heli Parts
Airplane Accessories
FPV Accessories
FPV Racing
Nitro Supplies
Power Supplies
Electronic Speed Controllers (ESCs)
Tools / Supplies
Gift Certificates
> >

Lemon Rx DSMX DSM2 Compatible 8 Channel PPM Receiver w/Satellite & Failsafe

Lemon Rx DSMX DSM2 Compatible 8 Channel PPM Receiver w/Satellite & Failsafe
  • Currently 0/5 Stars.
No reviews | Write a Review









Lemon Rx DSMX DSM2 Receiver 
Type: DSMX Compatible PPM 8-Channel Receiver
Number of Channel: 8 (PPM signal)
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 35(W) x 7(H) mm
Weight: 2.8 gram without satellite
Voltage Range: 3.45 - 7.2V

RCgroups discussion 

Complete user manual for download (PDF) (Thanks to John [JJ604 RCgroups] in helping us with this user manual.)
Click to download Lemon Rx User Manual.pdf 

Below is the quick online reference manual or additional information about the product. Please download the above pdf for a complete, detailed user manual.

- FailSafe option via press of a button to guranteed the highest level of safety even in the event of RF signal loss
- 3 microprocessors based system to ensure the highest performance available
- Designed especially for Copter high current drain application.

Understanding the receiver

Setup Instruction
Note: It is highly recommend user to enable FailSafe. Some copters' controller does not have fail-safe system implemented. At the case where the quad copter has flown very far away from the transmitter (eg. 2 km away from transmitter for Aerial photography application), RF signal may have faded due to far distance. FailSafe allows the receiver to output default signal when signal is lost to keep the quad copter flying until signal is recovered again.

Binding Setup
1) Plug bind plug to the receiver.
2) Provide power to the unit.
3) Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver.
4) Upon successful binding and if FailSafe do not wish to be set, remove bind plug upon binding.

Failsafe Enable
1) Plug bind plug to the receiver.
2) Provide power to the unit.
3) Press the FailSafe button for memorize current position in Failsafe mode.
4) Green light will turn on at the bottom of the receiver to indicate Failsafe is successfully enabled.
5) Remove bind plug.

Failsafe Disable
1) Rebind the receiver without pressing the side FailSafe button will disable the Failsafe mode.
2) Green light off indicates Failsafe disabled.

Pulse Sequence
The PPM pulse sequence is in the following order:
Throttle Aileron Elevator Rudder Gear Aux1 Aux2 Aux3

View Copter Cart
My Shopping Cart
Vias, MasterCard, Discover, American Express
Heli-Heli package tracking
Heli-Heli on Facebook
Check out our Youtube Page
Signup for the Heli-Heli Newsletter

Privacy Site Map Legal
Site best viewed using
IE 8 compatibility mode off